English
FAQ
You are here: Home » FAQ

  • Q How much do you know about the common troubles of a razor?

    A
    There is a sense of pulling when shaving
    1. Check whether the razor blade is rusty, blunt or damaged. If so, replace it with a new one.
    2. Check whether there is too much dirt in the electric shaver that hinders the normal operation of the moving blade or the normal rotation of the motor. As long as the dirt is removed, the problem can be eliminated.
    3. Check whether the position of the spring plate on the razor holder moves. If it moves, just fix the spring plate again.
    4. Check whether the spring plate on the razor holder has poor elasticity due to long-term use. If it has poor elasticity, replace it with a new one.
    5. After long-term use, the gap between the moving blade and the mesh cover hole cutter of the electric shaver will become larger, thus causing this kind of fault phenomenon. Generally, there is an adjusting screw in the center of the rotary movable tool holder, which can play an adjusting role as long as it is slightly rotated.

  • Q What should be paid attention to when using the shaver

    A
    The shaver looks safe on the surface, but you need to pay attention to it. If you don't use it correctly or pay attention to it, it is easy to cut and bleed. Then what should we pay attention to when using the razor? Pchouse will let you know.
    1. It's better not to shave close to the root of the beard. It's easy to break the beard under the skin and stimulate the hair follicle. And do not pull the skin too tight when shaving, because once the skin is relaxed, the beard is more likely to contract the inside of the skin.
    2. Scrape down from the top of the cheek to give the shaving cream more time to soften and shorten the hardest part of the beard. Also pay attention not to shave twice in the same place, and do not shave before exercise, because sweat will stimulate the skin just shaved.
    3. In addition, always replace the razor blade. We should also pay attention to the fact that the razor must not be mixed. It is absolutely impossible for several people to use a razor. It is easy to infect diseases. Also regularly clean, use a small brush to clean, be careful to be brushed by the blade.

  • Q Structure design of electric shaver

    A The structure of the electric shaver comprises a cutting head, a motor, a battery, a plug, etc. The cutter head structure of electric shaver includes cutter net knowledge support ring, cutter net, blade assembly and cutter net support frame. The cutter net and blade assembly matched with each other are positioned between the cutter net support ring and cutter net support frame. The lower part of the cutter net support frame is connected with universal ring. A set of connecting shaft and a set of sliding groove are respectively arranged on the universal ring to connect the shaft and cutter net support frame The reversing hole is hinged and matched, the sliding groove is matched with the hinge shaft on the tool holder, and the lower part of the tool head is supported with the spring piece of the support bracket. The utility model overcomes the defects that the cutter head of the ordinary electric rotary razor can't float in all directions when it is used, and the use of the utility model has poor comfort. Through the above design, when the cutter head contacts with the skin in the shaving process, the utility model can realize the self adjustment angle and free change direction with a very small pressure, so as to ensure the good floating fit of the cutter head and the skin, and the utility model has the structure Compact, shaving effect is better, the advantages of strong comfort.

  • Q Is the principle of electric razor and scissors cutting beard the same? Why is it said that electric razors are easier to make beard harder and denser than scissors

    A
    First of all, answer your first question: there are two ways of working for the electric whisker cutter on the market. One is rotary type, such as Philips. Its principle is similar to scissor cutting beard. The outside is the net cover, and the inside is the blade source with the blade. After the beard enters the hole of the net cover, the blade cuts the beard. The other is reciprocating, such as Braun, Panasonic. Its principle is similar to cutting steel. There is a mesh on the outside and a right angle cutter head on the inside. The beard is cut through the relative movement of the mesh and the cutter head. Generally speaking, the latter is faster than the former in shaving knowledge and shaving efficiency.
    The second problem: there will be a point when the beard becomes thick, that is, it will become thick with scissors, which is determined by the characteristics of the hair. It is difficult to become dense. People's pores are generally fixed in number, so they will not become dense.
  • Address
    688# Xinghuo Road 
  • Phone
    +86-138-6868-6868
  • E-mail
    service@qq.com